En stock
GETTING STARTED
BEFORE USE:
Working conditions
Use only at temperatures between +15°C and +25°C.
Personal safety
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water.
Preliminary surface treatment
The surface must be properly sanded and then cleaned and degreased.
Tools
A moist knife to cut off the required amount from the stick.
DURING USE:
Directions for use
Cut the required quantity from the rod with a damp knife (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
AFTER USE:
Stains/residue
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
Storage conditions
Store in a dry, cool and frost free place.
